CW02B – Wide-Angle Flat Fan Nozzle – 1/4″ BSPT – 140° – 3.9 L/min at 3 bar (PP)
4,95€
(Less quantity discount applied in cart)
- 5+ pcs −3%
- 10+ −5%
- 20+ −7%
- 50+ −10%
- 100+ −12%
The CW02B is a polypropylene hydraulic nozzle that produces a flat fan or lateral curtain with a wide 140° opening. It delivers 3.9 L/min of water at 3 bar and uses a 1/4″ BSPT male connection. Its lightweight PP construction suits water and many compatible diluted fluids, in washing, rinsing, wetting, cooling and wide distribution processes of low to medium demand.
- Effect: wide-opening flat fan.
- Nominal angle: 140°.
- Flow: 3.9 L/min at 3 bar.
- Orifice: 2 mm
- Connection: 1/4″ BSPT.
- Material: PP (polypropylene).
🔥Only 266 units left. ⏳Order now before they sell out!⏳
| Title | Range | Discount |
|---|---|---|
| No. of nozzles / Discount | 5 - 9 | 3% 4,80€ |
| No. of nozzles / Discount | 10 - 19 | 5% 4,70€ |
| No. of nozzles / Discount | 20 - 49 | 7% 4,60€ |
| No. of nozzles / Discount | 50 - 99 | 10% 4,46€ |
| No. of nozzles / Discount | 100 - 200 | 12% 4,36€ |
Description
CW02B: 140° wide-opening fan nozzle in polypropylene
The CW02B is a polypropylene hydraulic spray nozzle designed to produce a lateral curtain or flat fan with a wide 140° opening. It delivers 3.9 L/min of water at 3 bar and has a 1/4″ BSPT male connection. It is a lightweight, economical option for washing, rinsing, wetting, cooling and wide distribution of water or chemically compatible diluted fluids.
Main advantages
- Wide coverage at short distance: the nominal 140° angle spreads the liquid over a wide band without placing the nozzle too far away.
- Intermediate flow: 3.9 L/min at 3 bar, suitable for installations that need more supply than the low-consumption CW references without moving up to high flows.
- Lightweight construction: polypropylene reduces weight and avoids metal corrosion with many compatible fluids.
- Good cost-performance ratio: suitable for low to medium demand applications where the rigidity of a metal nozzle is not required.
- Prudent selection: maximum pressure, temperature and final chemical compatibility must be validated against the model’s technical data sheet.
Technical data
| Commercial reference | CW02B |
|---|---|
| SKU | CW-02B |
| Nozzle type | Hydraulic liquid nozzle |
| Spray pattern | Wide-opening flat fan / lateral curtain |
| Nominal angle | 140° |
| Nominal flow | 3.9 L/min at 3 bar – 2 mm orifice. |
| Nominal hourly flow | 234 L/h at 3 bar |
| Calculated K factor | 2.252 L/min/√bar |
| Connection | 1/4″ BSPT male |
| Material | PP (polypropylene) |
| Calculation fluid | Water |
| Reference pressure | 3 bar |
| Approved operating range | Up to 9 bar |
| Approved maximum temperature | 801 |
| Orifice and free passage | 1.9 |
| Weight and dimensions | 0.002 kg — 1.6*1.6*2.6 cm |
Water effect: wide-opening lateral curtain
The CW02B turns the incoming flow into a very open flat sheet, also called a flat fan, lateral curtain or wide-angle flat fan spray. This pattern is designed to distribute the liquid over a large surface with a more spread-out impact than a narrow flat jet.
The 140° angle is nominal and corresponds to the product’s reference point. Useful width and uniformity can vary with actual pressure, distance, viscosity, surface tension, orientation and wear. In assemblies with several units, it is advisable to check the overlap with a distribution test.
Estimated flow table from 1 to 10 bar
The K factor calculated from 3.9 L/min at 3 bar is 2.252 L/min/√bar. The values below were obtained for water using the relationship Q₂ = Q₁ × √(P₂/P₁).
| Pressure | Flow | Hourly flow | Flow in m³/h |
|---|---|---|---|
| 1 bar | 2.25 L/min | 135 L/h | 0.14 m³/h |
| 2 bar | 3.18 L/min | 191 L/h | 0.19 m³/h |
| 3 bar | 3.90 L/min | 234 L/h | 0.23 m³/h |
| 4 bar | 4.50 L/min | 270 L/h | 0.27 m³/h |
| 5 bar | 5.03 L/min | 302 L/h | 0.30 m³/h |
| 6 bar | 5.52 L/min | 331 L/h | 0.33 m³/h |
| 7 bar | 5.96 L/min | 357 L/h | 0.36 m³/h |
| 8 bar | 6.37 L/min | 382 L/h | 0.38 m³/h |
| 9 bar | 6.75 L/min | 405 L/h | 0.41 m³/h |
| 10 bar | 7.12 L/min | 427 L/h | 0.43 m³/h |
Theoretical values for water and a fixed orifice geometry. The table does not confirm that the CW02B is approved to work over the whole 1 to 10 bar range. Use only the range validated by the manufacturer and measure the pressure close to the nozzle with the system running.
Indicative geometric coverage at 140°
The theoretical width is estimated with 2 × distance × tan(angle/2). This geometry assumes an ideal, free spray; on its own it does not represent the uniform or usable width of the pattern.
| Distance to target | Approximate geometric width |
|---|---|
| 50 mm | 275 mm |
| 100 mm | 549 mm |
| 150 mm | 824 mm |
| 200 mm | 1099 mm |
| 300 mm | 1648 mm |
| 500 mm | 2747 mm |
The effective width may be smaller and the distribution need not be uniform across the whole band. For a spray bar, adjust height, spacing and overlap by real testing.
Polypropylene: properties and limits
PP is a lightweight, economical thermoplastic resistant to metal corrosion. It usually performs well with water, salts and many dilute acids or bases, so it can be suitable in low to medium demand installations when the specific fluid formulation is compatible.
It should not be considered chemically universal. Aromatic solvents, halogenated hydrocarbons, strong oxidants, oils and mixtures of unknown composition must be avoided or specifically validated. PP also loses rigidity as temperature rises and can deform under pressure; for this reason no maximum temperature or pressure is assigned to this nozzle until specific documentation is available.
The existence of food-contact PP grades does not mean that this particular reference has FDA, EU or drinking-water certification. Do not make that claim without a certificate for the material and the product.
Typical applications
- washing and rinsing of wide surfaces;
- wetting of belts, parts, aggregates or materials;
- surface cooling with water;
- dust control by distributed wetting;
- lateral water curtains on machinery and processes;
- distribution of dilute solutions compatible with PP;
- spray bars with wide coverage and low concentrated impact.
Applications are indicative. For food treatments, critical chemicals, fire protection or processes subject to approval, independent validation and specific documentation are required.
How to know whether this reference is suitable
Select the CW02B when you need a 1/4″ BSPT connection, a very open 140° fan and a nominal consumption of 3.9 L/min at 3 bar. First check that the PP material is compatible with the fluid and that the rigidity of the plastic is sufficient for the real pressure and temperature.
The total flow must be calculated with all the nozzles that will operate simultaneously. At 3 bar, five CW02B use 19.5 L/min, ten use 39 L/min and twenty use 78 L/min. The pump must supply that flow while maintaining useful pressure after losses in piping, filters, valves, height differences and fittings.
Which references to compare
- CW02: 1/4″ BSPT brass alternative, with lower flow and a wider nominal angle.
- CW12: PP alternative with lower flow and a 1/8″ BSPT connection.
- CW11: PP alternative with higher flow and a 1/2″ BSPT connection.
- CW20: wide-opening curtain kit with anti-drip function for specific assemblies.
No direct dimensional or functional equivalence between these references is declared. Compare thread, flow, angle, material, pressure and dimensions before replacing an existing nozzle.
Installation and maintenance
- Confirm the 1/4″ BSPT connection of the nozzle is male and check that the manifold uses the same standard.
- Do not confuse BSPT with NPT; the thread profile and pitch are not equivalent.
- Use a sealant compatible with PP and with the fluid, preventing it from entering the passage.
- Do not apply the tightening torque of a metal nozzle; the plastic body can be damaged or deformed.
- Install a suitable filter when the real free passage of the nozzle is known.
- Measure pressure and flow with all outlets active.
- Periodically check for blockages, deformation, wear and changes in the fan.
- Clean without metal needles or tools that alter the orifice.
Recommended calculators and tools
Calculate coverage by angleGet a first approximation for the 140° fan.
Size a spray barCalculate the number of nozzles, spacing and overlap.
Size the pump and pipingRelate total flow, useful pressure and pressure losses.
Check PP compatibilityCompare polypropylene with PVDF, stainless steel, brass and Delrin.
Frequently asked questions
How much does the CW02B use at 3 bar?
It uses 3.9 L/min, equivalent to 234 L/h, at the stated nominal point.
How much do ten nozzles use?
Ten units use approximately 39 L/min at 3 bar. The pump must maintain that flow at the real working pressure after the installation’s losses.
Can the CW02B be used at 10 bar?
The hydraulic formula estimates 7.12 L/min at 10 bar, but that calculation does not confirm that 10 bar belongs to the model’s approved range. It must be checked in the technical data sheet.
Does polypropylene resist chemicals?
It resists many dilute acids, bases and salts, but it is not universal. Concentration, temperature and exposure time must be validated, especially with strong oxidants, solvents, hydrocarbons or oils.
Is it suitable for food or drinking water?
That cannot be stated with the data available. Some PP grades have certifications, but this reference needs specific documentation before being presented as suitable.
What width does the 140° fan cover?
Geometric coverage grows roughly 5.49 times the distance to the target, but the real uniform width may be smaller. Validate the pattern with a distribution test.
Is the thread male?
Yes, it has a 1/4″ BSPT connection.
Additional information
| Weight | 0,002 kg |
|---|---|
| Dimensions | 1,6 × 1,6 × 2,6 cm |
| Thread |
You may also like…
Related products
-

CC03 – WATER CURTAIN – 1/4″ BSPT (GAS) – 95º – 12 LIT/MIN @3BAR (STAINLESS STEEL)
8,65€ Add to cart -

CC05 – WATER CURTAIN – 1/4″ BSPT (GAS) – 95º – 4 LIT/MIN @3BAR (PVDF)
6,45€ Add to cart -

CP01 – HIGH PRESSURE WATER CURTAIN – 1/4″ BSPT (GAS) – 50º – 1.7 LIT/MIN @3BAR (STAINLESS STEEL)
8,85€ Add to cart -

CA21 – WATER CURTAIN – metric 10 (M-10)” – 70º – 4.5 LIT/MIN @3BAR (DELRIN)
4,75€ Add to cart





